12
Configuring the Router (continued)
Static IP Connections
Static IP
is used to set the Static IP mode for the Router. Static IP is used whenever a known
static IP address is assigned. The accompanying information such as the Subnet mask and
the gateway should also be specified in order to be able to connect. These are the servers
would enable you to have access to other web servers. Information entered here must come
from your ISP. You may change the PVC (Permanent Virtual Channel) settings and the
Encapsulation.
Type
the IP addresses
for the
WAN IP
Address
,
Subnet
Mask
,
ISP Gateway Address,
Primary DNS Address
and/or
Secondary DNS
Address
,
as instructed
by your ISP.
Enter
the
VPI
and
VCI
numbers that
have been
provided by
your ISP.
Select
the
Connection Type
as
1483 Bridged IP LLC
,
1483
Bridged IP VC-Mux, 1483 Routed
IP LLC, 1483 Routed IP VC-Mux
or
IPoA,
as instructed by your ISP.
Click
the
Next
button. Skip ahead to the Setup
Completed menu below.
Summary of Contents for DSL-584T
