D-Link DSL-7850U VDSL2 Router User Manual
錯誤
錯誤
錯誤
錯誤
!
使用
使用
使用
使用
[
常用
常用
常用
常用
]
索引標籤將
索引標籤將
索引標籤將
索引標籤將
Heading 1
套用到您
套用到您
套用到您
套用到您想要在此處顯示的文字
想要在此處顯示的文字
想要在此處顯示的文字
想要在此處顯示的文字。
。
。
。
Page 23
After clicking the
Edit/Add
button, the following page will be displayed. Here we can
configure the interface’s parameters.
Parameters that can be configured are the following:
PPP Username
: Enter the username provided by your ISP
PPP Password
: Enter the password provided by your ISP
PPPoE Service Name
: Enter the PPPoE service name provided by your ISP
Authentication Method
: From the drop-down list select either
AUTO
,
PAP
,
CHAP
,
MSCHAP
Enable Fullcone NAT
: Click the checkbox if you need this function
Dial on demand
: Click the checkbox if you need this function
Use Static IPv4 Address
: Click the checkbox if you need this function
Enable PPP Debug Mode
: Click the checkbox if you need this function
Bridge PPPoE Frames Between WAN and Local Ports
: Click the checkbox if you
need this function
Multicast Proxy
: Click the checkbox if you need this function
Enable IGMP Multicast Proxy
: Click the checkbox if you need this function
NAT
: Click the checkbox if you need this function
Firewall
: Click the checkbox if you need this function
Click the
Back
button to return to the previous page.
Click the
Next
button to continue to the next page.
After clicking the
Next
button, the following page will be displayed. Here we can view
a summary of the interface’s parameters.
Click the
Back
button to return to the previous page.
Click the
Apply/Save
button to accept the changes.
