DSL-G2452GR
AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Encryption protocol
Select a method of MPPE encryption.
•
No encryption
: MPPE encryption is not applied.
•
MPPE 40 128 bit
: MPPE encryption with a 40-bit or 128-bit
key is applied.
•
MPPE 40 bit
: MPPE encryption with a 40-bit key is applied.
•
MPPE 128 bit
: MPPE encryption with a 128-bit key is
applied.
MPPE encryption can be applied only if the
MS-CHAP
,
MS-
CHAPv2
, or
AUTO
value is selected from the
Authentication
protocol
drop-down list.
Authentication
protocol
Select a required authentication method from the drop-down list or
leave the
AUTO
value.
Keep Alive
Move the switch to the right if you want the router to
keep you
connected to your ISP even when the connection has been inactive
for a specified period of time. If the switch is moved to the right, the
LCP interval
and
LCP fails
fields are available. Specify the
required values.
Dial on demand
Move the switch to the right if you want the router to establish
connection to the Internet on demand. In the
Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
Static IP address
Fill in the field if you want to use a static IP address to access the
Internet.
PPP debug
Move the switch to the right if you want to log
all data on PPP
connection debugging.
Page
109
of 358
