DSL-G2452GR
AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
MODEM/SIM CARD
SELECTION
Click the button in order to assign the connection to one of
connected USB modems.
Mode
The value of the field specifies the type of the network to which the
router connects. Leave the
Auto
value to let the router connect
automatically to an available type of network, or select a needed
value from the drop-down list.
APN
An access point name.
Dial number
A number dialed to connect to the authorization server of the
operator.
Without authorization
Move the switch to the right if your operator does not require
authorization.
Authentication protocol
Select a required authentication method from the drop-down list.
Username
A username (login) to connect to the network of the operator.
Password
A password to connect to the network of the operator.
Click the
Show
icon (
) to display the entered password.
Type
An IP version which will be used by this connection. Select the
IPv4
,
IPv6
, or
Dual
value from the drop-down list.
Figure 103. The page for creating a new
Mobile Internet
connection. The
PPP
section.
11 When several devices are connected to one USB port of the router, it is recommended to use a self-powered USB
hub.
Page
128
of 358
