DSL-G2452GR
AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Health Check
Enable
Move the switch to the right to check the connection health using
the ICMP ping mechanism.
The maximum number
of attempts
A number of requests to check the health of the connection. By
default, the value
10
is specified.
Several ping requests are sent to check the hosts. After several
failed attempts the connection status is changed until a successful
attempt is made.
Timeout
A time period (in seconds) allocated for a respond to one ping
request. By default, the value
3
is specified.
Connection restart
Move the switch to the right to reestablish connection if the
maximum number of ping requests fails.
Addresses
IP addresses from the external network that the router will check for
availability via ICMP ping mechanism. By default, the router
checks the IP address 8.8.8.8.
Click the
ADD
button, and in the line displayed, enter an IP address
or leave value suggested by the router. You can add several
addresses.
To remove an IP address from the list, click the
Delete
icon ( ) in
the line of the address.
Modem IP address
verification
Move the switch to the right to let the router request the actual IP
address from the modem in case modem's IP address changes before
expiration of the previous one.
When all needed settings are configured, click the
APPLY
button.
Page
130
of 358
