DSL-G2452GR
AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Using WPS Function without Web-based Interface
You can use the WPS function without accessing the web-based interface of the router. To do this,
you need to configure the following router's settings:
1. Specify relevant security settings for the wireless network of the router.
2. Make sure that the
Enable WPS function with hardware button
switch is moved to
the right on the tabs of both bands.
3. Click the
ENABLE
WPS
button.
4. Сlose the web-based interface (click the
Logout
line of the menu).
Later you will be able to add wireless devices to the WLAN by pressing the
WPS
button of the
router.
1. Select the PBC method in the software of the wireless device that you want to connect to the
router's WLAN.
2. Click the relevant button in the software or press the WPS button on the cover of the
wireless device that you want to connect to the WLAN.
3. Press the
WPS
button of the router, hold it for 2 seconds, and release. The
WPS
LED
should start blinking.
Page
188
of 358
