DSL-G2452GR
AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
USB Modem
This menu is designed to operate USB modems.
!
Some models of USB modems do not allow performing operations available in this menu
section through the web-based interface of the router.
If the PIN code check for the SIM card inserted into the USB modem is not disabled, the relevant
notification will be displayed in the top right corner of the page.
Figure 167. The notification on the PIN code check.
Click the
ENTER PIN
button and enter the PIN code in the
PIN Input
window. Click the
Show
icon (
) to display the entered code. Then click the
APPLY
button.
Figure 168. The window for entering the PIN code.
Some USB modems in the router mode and Android smartphones in the modem mode have an IP
address from the subnet which coincides with the router's local subnet. In this case, the router's
web-based interface can be unavailable. For correct operation, disconnect the device from the USB
port and reboot the router. Then access the web-based interface, go to the
Connections Setup /
LAN
page, and change the value of the
IP address
field on the
IPv4
tab (for example, specify the
value
192.168.2.1
). Wait until the router is rebooted.
Page
223
of 358
