DSL-G2452GR
AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Bound interface name
A connection or a group interfaces of the router for VoIP. Select the
needed value from the drop-down list. The field is displayed if the
Connection
value is selected from the
Interface type
drop-down
list, or if the
WAN group
value is selected and there are several
NAT interface groups created on the router. You can create groups
consisting of interfaces and ports of the router on the
Advanced /
Interface Grouping
page
(see the
section,
page 234).
Local SIP port
A port of the router for outbound SIP traffic. Unless another setting
is given by your ISP, it is recommended to leave the default value
(
5060
).
In the
Profile List
section, the list of existing profiles with their status is displayed.
To create a new profile, click the
ADD
button (
).
Figure 199. The window for adding a profile.
In the opened window, you can specify the following parameters:
Parameter
Description
Enable
Move the switch to the right to enable the profile.
Move the switch to the right to disable the profile.
Enable DHCP option
120
Move the switch to the right to allow using DHCP option 120.
Move the switch to the left if your provider does not require
automatic obtainment of the SIP proxy server address.
Name
The name of the profile for easier identification. You can specify any
name.
When all needed settings are configured, click the
SAVE
button.
To edit an existing profile, in the
Profile List
section, select the relevant line in the table. In the
opened window, change the needed parameters and click the
SAVE
button.
Page
262
of 358
