DSL-G2452GR
AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Locale selection
Select your country from the drop-down list. This setting defines the
parameters of the phone signals traditional for the specific country.
Replace # with %23
RFC3261 doesn't support # (pound) for a phone number. If a phone
number has the character, move the switch to the right to replace the
character # with the special sequence %23.
Support rport
Move the switch to the right to enable the Symmetric Response
Routing function in accordance with RFC3581. This function allows
sending responses to a request to the port and IP address from which
the request was received via the NAT-enabled router. The SIP proxy
server must support the function.
SIP transport protocol
Transport protocol that will be used to transfer SIP packets. Select
the needed value from the drop-down list.
Record to USB
Save log to a USB
storage
Move the switch to the right to save the call log to a USB storage
connected to the router. Upon that the
Path
and
File name
fields
are displayed on the page.
Path
Click the
Search
icon (
) located to the right of the field in order
to locate the folder where call log files will be stored.
File name
A name for call log files.
NAT Traversal
Mode
The NAT Traversal function allows VoIP traffic to pass through the
NAT-enabled router.
Select the
Disabled
value to disable the function.
Select the
STUN
value to enable the STUN client (
Session
Traversal Utilities for NAT
). The STUN client sends requests to a
STUN server. On the basis of the received replies, the client allows
VoIP traffic to pass through the NAT-enabled router. When this value
is selected, the
Server address
,
Port
, and
Binding period
fields
are displayed.
Select the
NAT Public IP
value to manually specify a public
(“white”) IP address of an upper-level router which exchanges
service messages with the SIP proxy server. When this value is
selected, the
Public address
and
Port
fields are displayed.
Server address
An IP or URL address of a STUN server to which a connection is
established.
Page
265
of 358
