DSL-G2452GR
AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
DND on schedule
Move the switch to the right to reject all incoming calls at a certain
time of day. If the switch is moved to the right, the
Time period
field is available. Specify the needed period as
HH:MM-HH:MM
,
where
HH:MM
is time in 24-hour format.
Session Control
Enable session control
Move the switch to the right to enable session control. Upon that you
will be able to manage voice sessions during a call with the help of
the
FLASH
key on your phone. (The function should be supported
by your ISP).
Transfer code
Feature code for transferring a call to another phone.
Advanced management
Move the switch to the right to use combination of the
FLASH
key
and keys of the phone in order to organize three-party calls, manage
sessions and calls.
By default, each action is assigned to a certain key of the phone set.
To change this value, in the line corresponding to the action, select
the needed value from the drop-down list.
Use of
FLASH
key
•
The function is enabled. The phone connected to this line has
an incoming call in the standby mode and an outgoing call in
the talk mode. It's needed to press the
FLASH
key, hear the
dial tone, and then press the key corresponding to your
action.
•
The function is not enabled. The phone connected to this line
has an incoming call in the standby mode and an outgoing
call in the talk mode. It's needed:
◦
to press the
FLASH
key in order to put the second call
on hold and continue the first call,
◦
to hang up the receiver in order to end both calls and
connect the first and second speakers to each other.
Attended transfer
Move the switch to the right if you want to transfer calls when a
called party’s receiver is lifted.
Alert transfer
Move the switch to the right if you want to transfer calls when a dial
tone is heard.
Page
276
of 358
