DSL-G2452GR
AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
T.38
Enable T.38 support
Move the switch to the right to allow support of the T.38 protocol. If
the switch is moved to the right, the
Port
field, the
Fax/Modem
determination
drop-down list, and the
Enable custom
parameters
switch are displayed on the page.
Port
The router's port for data transfer via T.38.
Fax/Modem
determination
From the drop-down list, select a mode of fax/modem signal
detection.
Enable custom
parameters
Move the switch to the right to specify additional parameters for
T.38 protocol. Upon that the
Custom Parameters T.38
section is
displayed on the page.
Custom Parameters T.38
Maximal buffer
The maximum buffer size (in bytes) for data received by the router.
Rate management (TCF)
From the drop-down list, select a method for facsimile data transfer
rate management:
Local
or
Network
.
Maximal rate
From the drop-down list, select the maximum rate for facsimile data
receipt/transfer (in bauds).
Error correction mode
Move the switch to the right to enable the error correction mode.
When the switch is moved to the right, the
ECC signal
and
ECC
data
fields are available for editing.
Enable spoofing
Move the switch to the right to let the router simulate facsimile data
receipt/transfer in case of delays.
Duplicate number
Specify the number of packet duplications.
Page
285
of 358
