DSL-G2452GR
AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Configuring via Web-based Interface
Parameter
Description
Subnet IPv4 address /
Subnet IPv6 address
The source subnet IPv4 or IPv6 address. The field is displayed when
the
Subnet
value is selected from the
Set as
drop-down list.
Destination IP address
Set as
Select the needed value from the drop-down list.
Start IPv4 address /
Start IPv6 address
The destination host start IPv4 or IPv6 address.
If it is necessary to specify a single address, leave the
End IPv4
address / End IPv6 address
field blank.
You can choose a device connected to the router's LAN at the
moment. To do this, select the relevant IPv4 or IPv6 address from the
drop-down list (the field will be filled in automatically).
End IPv4 address /
End IPv6 address
The destination host end IPv4 or IPv6 address.
Subnet IPv4 address /
Subnet IPv6 address
The destination subnet IPv4 or IPv6 address. The field is displayed
when the
Subnet
value is selected from the
Set as
drop-down list.
Ports
Destination port
A port of the destination IP address. You can specify one port,
several ports separated by a comma, or a range of ports separated by
a colon.
Set source port
manually
Move the switch to the right to specify a port of the source IP
address manually. Upon that the
Source port
field is displayed.
Source port
A port of the source IP address. You can specify one port, several
ports separated by a comma, or a range of ports separated by a colon.
Click the
APPLY
button.
To set a schedule for the IP filter rule, click the
Set schedule
icon (
) in the line corresponding
to this rule. In the opened window, from the
Rule
drop-down list, select the
Create rule
value to
create a new schedule (
326) or select the
Select an existing one
value to use the existing one. Existing schedules are displayed in the
Rule name
drop-down list.
To enable the IP filter rule at the time specified in the schedule and disable it at the other time,
select the
Enable rule
value from the
Action
drop-down list and click the
SAVE
button.
To disable the IP filter rule at the time specified in the schedule and enable it at the other time,
select the
Disable rule
value from the
Action
drop-down list and click the
SAVE
button.
Page
303
of 358
