D-Link DSL-G2452GR User Manual Download

Page: 324 / 358

DSL-G2452GR

AC1200 MU-MIMO Wireless Dual Band

VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port

User Manual

Configuring via Web-based Interface

Local Update

Attention! Do not turn off the router before the firmware update is completed. This may
cause the device breakdown.

To update the firmware of the router locally, follow the next steps:

1. Download a new version of the firmware from

www.dlink.ru

2. Click the

CHOOSE FILE

button in the

Local Update

section on the

System /

Firmware Update

page to locate the new firmware file.

3. If you want to restore the factory default settings immediately after updating the firmware,

move the

Restore factory defaults after firmware update

switch to the right.

4. Click the

UPDATE FIRMWARE

button.

5. Wait until the router is rebooted (about one and a half or two minutes).

6. Log into the web-based interface using the login (

admin

) and the current password.

If after updating the firmware the router doesn't work correctly, please restore the factory default
settings. To do this, click the

Factory

button on the

System / Configuration

page. Wait until the

router is rebooted.

Page

324

of 358

Summary of Contents for DSL-G2452GR







































































































































































































































































































































































Search results

Summary of Contents for DSL-G2452GR

Reviews:

Related manuals for DSL-G2452GR

Brands by name

Popular brands

D-Link DSL-G2452GR, User Manual

Search results

Summary of Contents for DSL-G2452GR

Reviews:

Related manuals for DSL-G2452GR

Brands by name

Popular brands