D-Link DSL-G2452GR User Manual Download

Page: 334 / 358

DSL-G2452GR

AC1200 MU-MIMO Wireless Dual Band

VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port

User Manual

Configuring via Web-based Interface

Ping

On the

System / Ping

page, you can check availability of a host from the local or global network

via the Ping utility.

The Ping utility sends echo requests to a specified host and receives echo replies.

Figure 240. The

System / Ping

page.

To check availability of a host, enter the IP address or name of this host in the

Host

field and

specify a number of requests that will be sent in order to check its availability in the

Number of

attempts

field. If availability check should be performed with IPv6, move the

IPv6

switch to the

right.

To specify additional settings, click the

MORE SETTINGS

button.

Page

334

of 358

Summary of Contents for DSL-G2452GR







































































































































































































































































































































































Search results

Summary of Contents for DSL-G2452GR

Reviews:

Related manuals for DSL-G2452GR

Brands by name

Popular brands

D-Link DSL-G2452GR, User Manual

Search results

Summary of Contents for DSL-G2452GR

Reviews:

Related manuals for DSL-G2452GR

Brands by name

Popular brands