DSL-G2452GR
AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Installation and Connection
The
Device Information
section displays the model and hardware version of the router, the
firmware version, and other data.
To contact the technical support group (to send an e-mail), left-click the support e-mail address.
After clicking the line, the e-mail client window for sending a new letter to the specified address
opens.
To change the operation mode of the device, left-click the name of the mode in the
Device mode
line. In the opened window, click the
Initial Configuration Wizard
link (for the detailed
description of the Wizard, see the
If needed, you can disable the LEDs of the device. To do this, move the
Enable LEDs
switch to
the left. In order to enable the LEDs, move the switch to the right and reboot the device.
The
Wi-Fi 2.4 GHz
and
Wi-Fi 5 GHz
sections display data on the state of the device's wireless
network, its name and the authentication type, and availability of an additional wireless network in
the relevant band.
In the
WAN
section, data on the type and status of the existing WAN connection are displayed.
In the
LAN
section, the IPv4 and IPv6 address of the router, the LAN MAC address, and the
number of wired and wireless clients of the device are displayed.
The
LAN Ports
section displays the state of the device's LAN ports and data transfer mode of
active ports.
In the
DSL Status
section, data on the DSL connection state is displayed.
The
USB Devices
section displays the device connected to the USB port of the router.
The
VoIP
section displays data on the status of the existing VoIP lines, phones, and DHCP
option 120.
The
Yandex.DNS
section displays the Yandex.DNS
service state and operation mode. To enable
the Yandex.DNS
service, move the
Enable
switch to the right.
If needed, change the operation
mode of the service.
Page
45
of 358
