DSL-G624T Wireless ADSL Router User Guide
Rear Panel Connections
All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on
the Router. Use the Reset button to restore the settings to the factory default values. See below for reset
button location.
Connect network cables:
Insert the ADSL (telephone) cable included with the Router into the ADSL port and then connect the cable
to your telephone line.
Insert one end of the Ethernet cable into the Ethernet (LAN) port on the back panel of the Router and the
other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.
Reset
ADSL Port
Use the ADSL cable
to connect to the
your telephone line
Ethernet Ports
Connect the Router
to your Ethernet
LAN or computer
Power Insert
Use adapter
shipped with the
Router to connect
to power source
Reset
To manually reset, depress
button with the power on for
at least seven seconds
Antenna
Antenna must be securely
fastened to threaded post
To Reset the Router to factory default settings including the default IP address 192.168.1.1, depress the reset
button on the right side panel with a ballpoint pen, paper clip or similar object for a few seconds. The device
will restart with default settings.
6