background image

DSL-G624T Wireless ADSL Router User Guide 

PPTP Connection 

Some ISPs use PPTP tunneling to create a secure point-to-point connection that requires input of a user name 
and password. This connection type might operate together with a Static IP address, Dynamic IP address or a 
PPPoE/PPPoA type connection. Your ISP should give you all the information needed to configure a PPTP 
connection. 

 

PPTP Settings for Static IP, Dynamic IP and PPPoE/PPPoA connections 

PPTP Parameters 

Description 

Server IP/Name 

Type the IP address supplied by your ISP. 

Route Target 

The gateway IP address is used to provide access to resources outside your IP 

subnet or ISP’s network. Type the gateway IP address given to you by your 

ISP. 

Route Mask 

Type the subnet mask supplied by your ISP. 

PPTP Account 

This is just like a username, used to identify the PPTP client. 

PPTP Password 

This works like a PPP connection password, to verify the identity of the client 

that is trying to establish a connection. Passwords are case-sensitive. 

MPPE Encryption 

This Microsoft Point-to-Point Protocol Encryption protocol options include 

Disable

mppc mppe required

mppc mppe required no40

mppc mppe required 

no56

, and 

mppc mppe required no128

. This feature is disabled by default. 

Please consult your ISP for further information about what type of encryption is 

supported. 

 

43

Summary of Contents for DSL-G624T























































































































Reviews: