DSL-G624T Wireless ADSL Router User Guide
Installation Notes
In order to establish a connection to the Internet it will be necessary to provide information to the Router that
will be stored in its memory. For some users, only their account information (Username and Password) is
required. For others, various parameters that control and define the Internet connection will be required. You
can print out the two pages below and use the tables to list this information. This way you have a hard copy
of all the information needed to setup the Router. If it is necessary to reconfigure the device, all the necessary
information can be easily accessed. Be sure to keep this information safe and private.
Low Pass Filters
Since ADSL and telephone services share the same copper wiring to carry their respective signals, a filtering
mechanism may be necessary to avoid mutual interference. A low pass filter device can be installed for each
telephone that shares the line with the ADSL line. These filters are easy to install passive devices that
connect to the ADSL device and/or telephone using standard telephone cable. Ask your service provider for
more information about the use of low pass filters with your installation.
Operating Systems
The DSL-G624T uses an HTML-based web interface for setup and management. The web configuration
manager may be accessed using any operating system capable of running web browser software, including
Windows 98 SE, Windows ME, Windows 2000, and Windows XP.
Web Browser
Any common web browser can be used to configure the Router using the web configuration management
software. The program is designed to work best with more recently released browsers such as Microsoft
Internet Explorer® version 6.0, Netscape Navigator® version 6.2.3, or later versions. The web browser must
have JavaScript enabled. JavaScript is enabled by default on many browsers. Make sure JavaScript has not
been disabled by other software (such as virus protection or web user security packages) that may be running
on your computer.
Ethernet Port (NIC Adapter)
Any computer that uses the Router must be able to connect to it through the Ethernet port on the Router. The
easiest method of installation is via the Ethernet connection and therefore requires that your computer be
equipped with an Ethernet port as well. Most notebook computers are now sold with an Ethernet port already
installed. Likewise, most fully assembled desktop computers come with an Ethernet NIC adapter as standard
equipment. If your computer does not have an Ethernet port, you must install an Ethernet NIC adapter before
you can use the Router. If you must install an adapter, follow the installation instructions that come with the
Ethernet NIC adapter.
Additional Software
For a bridged connection, the information needed to make and maintain the Internet connection is stored on
another computer or gateway device using PPP client or similar third party client software, not in the Router
itself.
If your ADSL service is delivered through a PPPoE, PPPoA or Static IP connection, the information needed
to establish and maintain the Internet connection can be stored in the Router. In this case, it is not necessary
to install software on your computer. It may however be necessary to change some settings in the device,
including account information used to identify and verify the connection.
vi
