background image

DSL-G804V Wireless ADSL Router User’s Guide

 

 

MPoA (RFC1483/RFC2684, Multi protocol Encapsulation over AAL5) 

 

Figure 3-6. WAN Setup window - MPoA 

Parameter 

            Description 

Encapsulation 
Method 

Select the encapsulation format, this is provided by your ISP. 

IP Assignment 

Please click 

Obtain an IP address automatically via DHCP client

 to enable 

the DHCP client function or click 

Specify an IP address

 to disable the DHCP 

client function, and specify the 

IP address,

 

Netmask

 and 

Gateway

 manually. 

The setting of this item is specified by your ISP. 

RIP (Routing 
Information 
Protocol) 

It is an interior routing protocol for router to exchange routing information. 

MTU (Maximum 
Transmission Unit) 

This is the size of largest datagram (excluding media-specific headers) that IP 
will attempt to send through the interface.  The default setting is 1500. 

NAT (Network 
Address 
Translation) 

This allows multiple users to access the Internet through a single ISP account, 
sharing a single IP address. If users on your LAN have public IP addresses 
and can access the Internet directly, the NAT function can be disabled. 

ATM Class 

The Quality of Service for ATM layer. 

 

 

 

23

Summary of Contents for DSL-G804V


















































































































Reviews: