7
D-Link DSM-750 User Manual
Section - Configuration
Wireless Setup
Make sure the supplied three antennas are properly attached onto the “gold” antenna connectors located on the back
of the DSM-750, and that the antennas are secure and in an upright position.
For the quickest and easiest installation, it is
highly
recommended that DHCP and SSID broadcast are enabled. Most
networks have DHCP and SSID broadcast enabled to allow new devices to find the wireless network and connect
automatically.
After you’ve connected the antennas, plug the end of the DSM-750 power supply cord into a power outlet. Position
your media player so that you can see it from where you view your TV. Power on the DSM-750 by pressing the
Power
button on the included DSM-750 remote control.
Note:
Make sure your media player is not behind the TV so you can use your DSM-750 remote control.
Using the TV’s remote control, turn on your TV and select the correct audio/video input source. When the correct audio/
video input source is selected, you will see the MediaLounge
™
startup screen or
Optional Set Up
screen.
Note:
If you don’t remember how to change TV inputs, refer to
the TV User Manual for instructions.
Summary of Contents for DSM-750 - MediaLounge High-Definition Draft N Media Player
Page 1: ......
