9
DSM-G600 User’s Manual
D-Link Systems, Inc.
Hardware Installation
A.
Unscrew the two screws on the
back panel of the DSM-G600 to
remove the cover.
B.
Connect the IDE cable to the IDE
cable connector on your hard
drive.
Note:
Make sure the jumper setting
on your hard drive is set to
Master
or
Cable Select
.
C.
Connect the power cable to the power
connector on your hard drive.
Hardware Installation
Summary of Contents for DSM-G600 - MediaLounge Wireless G Network Storage Enclosure NAS...
Page 1: ......