18
D-Link Systems, Inc.
DSM-G600 Install Guide
Configuration
Configuration (continued)
Click
Next
.
When selecting
Access Point
mode,
you will need to enter the following
network settings:
SSID
- Enter the SSID or network
name.
Channel
- Select the channel of your
wireless network (1-11).
802.11g Only Mode
- Select Enabled
if all your wireless devices are 802.11g,
otherwise select Disabled.
SSID Broadcast
- Select Enabled to
allow your SSID to be seen by any
wireless device.
Security
- Select to enable WEP, WPA,
or WPA-PSK security.
Click
Next
.
If you select WEP, enter the following
settings:
Security Mode
- Select WEP.
Authentication
- Select Shared.
Encryption Mode
- Select the level of
encryption (64 or 128-bit).
Key Format
- Select Hex or ASCII.
Default Key
- Select which key you want
to use.
Key (1-4)
- Enter your WEP key. You may
enter up to 4 different keys.
Enter the same settings on your wireless
clients.
