b u s i n e s s
DSN-3000
Series iSCSI SAN Array
Technical Specifications
DSN-3200-10
• Eight 1GbE Copper
• Up to 850MB/s
DSN-3400-10
• One 10GbE (XFP adapter sold separately)
• Up to 1160MB/s
Features
Drive Bays
• 15
Drive Interface Support
• SATA-II support
System Memory
• 512MB standard
Cache Memory
• 512MB standard
Battery Backup for Cache
• Standard (approximately 72 hours on full charge)
Storage Capacity
• 30TB Capacity with 2TB Hard Drives
Operating Systems Supported
Please see support.dlink.com for latest
support information
• Windows Vista® 32-bit & x64 (Ultimate & Enterprise) w/Built-in iSCSI initiator
•
Windows Server® 2003 R2 | SP1 32 & 64-bit (Standard & Enterprise) with v2.07 iSCSI initiator or later
•
Windows Server 2008 Enterprise 32 & 64-bit with Built-in iSCSI initiator
•
Windows XP Pro® 32 & 64-bit with v2.07 iSCSI initiator or later
•
Windows 2000 Advanced Server – No MS iSCSI Initiator support, Qlogic HBA only
•
Red Hat® 7.3
•
Red Hat Enterprise AS update 5 (64-bit)
•
Red Hat Enterprise 5 update 2 (64-bit)
•
SuSE® Professional 9.3 32-bit
•
SuSE Enterprise Server 10.2 32-bit
•
Sun Solaris® 10 build 6/06
•
IBM AIX 5L
•
Microsoft Hyper-V
•
VMWare ESX Server® 3.02 & 3.5
•
VMWare ESX Server 4.0
•
Virtual Iron v4.2
•
Citrix XenServer® v4
•
Mac OS X® (10.4 & 10.5)
Supported NICs, iSCSI Accelerators
and iSCSI HBAs
Please see support.dlink.com for latest
support information
•
Intel® Pro 1000MT & XT [1GbE]
•
Intel Pro 10000 CX4 [10GbE]
•
Myricom 10G-PCIE-8A-C+E [10GbE]
•
Chelsio® S310X-SR-XFP [10GbE]
•
Neterion® Xframe® II & Xframe E [10GbE]
•
Alacritech® SES2104ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)
•
Alacritech SES2102ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)
•
QLogic® 4010C, 4052C, & 4062C
iSCSI Network Interface
Host Interface
• iSCSI Draft 20 compliant initiator
Connections
• 1,024 hosts
CHAP Authentication
• Yes
Access Control of Management
• Yes
iSCSI/TCP/IP Full HW Offload
• Yes
Jumbo Frames Support
• Yes
LAG Support (Link Aggregation)
• Up to eight LAGs with DSN-3200-10 (Static LAG)
VLAN Support
• Up to eight 1-to-1 mapping between IP subnet and VLAN. Multiple VLANs per physical port with VLAN tag. All
physical ports in LAG belong to same VLAN (IEEE802.1Q Tag) (DSN-3200-10)
Flow Control
• Enabled by default
