128
Chapter 7 Factory Default Settings
2.
In the
IP Address to Ping
field, enter the destination IP address of the host.
3.
Click the
Ping
button. The results of the ping appear in the
Results
area of the dialog
box.
4.
When you finish, click the
Close
button to close the dialog box.
7.2
Pinging from the xStack Storage Array Management Port
The Ping Out of Band dialog box also lets you ping or locate the management workstation
connected to the xStack Storage Array management port.
To ping from the xStack Storage Array management port, use the following procedure:
1.
Select the
Physical Resources
tab.
2.
On the
File
menu, click
Ping from Out of Band Port
. A dialog box similar to the one in
Figure 7-2 appears.
3.
In the
IP Address to Ping
field, enter the destination IP address of the management
workstation.
4.
Click the
Ping
button. The results of the ping appear in the
Results
area of the dialog
box.
5.
When you finish, click the
Close
button to close the dialog box.
Figure 7-2. Pinging from the Management Port
Summary of Contents for DSN-3400-10 - xStack Storage Area Network Array Hard...
