58
Chapter 5 Configuring the xStack Storage Array
5.4.1.1
Creating Volumes
Adding volumes defines what volumes are accessible through the target. Using the management
console, you can create volumes automatically or manually.
The automatic method is the fastest way to create volumes. See Section 5.4.1.1.1.
The manual method lets you customize and fine-tune volumes. See Section 5.4.1.1.2.
5.4.1.1.1
Creating Volumes Automatically
The following procedure describes how to create volumes automatically with the Create Volume
Wizard. With this method, the administrator answers questions about the required redundancy,
size, and usage characteristics of the volume. The xStack Storage Array then determines the
remaining parameters needed to allocate the storage space and create the volume. As you create
volumes, record the information in Appendix B.
1.
In the
Logical Resources
tab, click
Blade A Base Pool
.
2.
Perform one of the following steps in the
Logical Resources
tab:
–
Click the
Create Volume
button on the toolbar.
–
On the
Storage
menu, click
Create Volume
.
–
Right-click
Blade A Base Pool
and click
Create Volume
.
Any of these steps starts the Create Volume Wizard and displays the Select Volume Type to
Create screen (see Figure 5-11).
Figure 5-11 Create Volume Wizard Screen – Select Volume Type to Create Screen
Summary of Contents for DSN-3400-10 - xStack Storage Area Network Array Hard...
