Information in this document is subject to change without notice.
© 2021 D-Link Corporation. All rights reserved.
Package Contents
DUB-2327 docking station
Quick Installation Guide
Warranty documents
Minimum Requirements
PC or laptop with:
Windows 7/8/8.1/10 and above, macOS (OS X 10.8 and above)
USB Type-C port supporting DP Alt (DisplayPort Alternate Mode) for HDMI output
Hardware Overview
Interfaces
Figure 1
Number
Interface
Description
1
USB Type-C connector
Connect to laptop or desktop computer
2
HDMI port
Connect to monitor*
3
USB 3.0 ports
Connect to USB devices
4
SD/microSD card slots
Insert SD card and microSD card
5
USB Type-C/PD 3.0 port
Connect to PD 3.0 charger
Table 1
* Please make sure that the USB Type-C port of your computer supports DP Alt (DisplayPort Alternate Mode).
LED Indicators
LED
Status
Description
Power (per device)
Solid green
Power is on
Table 2
Product Setup
1. Plug the USB Type-C cable, located on the side panel of the DUB-2327, into available USB Type-C port on your
computer. Your computer will automatically detect and install the drivers for the DUB-2327.
2. You may now connect additional devices to the appropriate ports of the DUB-2327 and insert SD and microSD cards
into the appropriate slots. Use the dual slot card reader to access data on a SD and microSD card simultaneously.
Note: if your computer does not detect the DUB-2327, please check and ensure that the USB Type-C cable of the DUB-2327 is
connected securely, and that the USB Type-C port on your computer is functioning correctly.
Connecting PD 3.0 Charger
To charge your laptop* via connected DUB-2327, please connect PD 3.0 charger to the USB Type-C/PD 3.0 port of the
DUB-2327 and plug PD 3.0 charger into a power outlet.
* Please make sure that the USB Type-C port of your laptop supports PD 3.0.
2
E
N
G
LI
S
H
