background image

7

D-Link DVA-5592 User Manual

Section 2 - Installation

Choosing a Location

Many environmental factors may affect the wireless function of the router. If this 

is the first time that you have set up a wireless network device, read the following 

information.

The router can be placed on a shelf or desktop and ideally the LED indicators should 

be facing towards the front, as you may need to view them for troubleshooting.

Designed to have a range of up to 100 meters indoors and up to 300 meters outdoors, 

wireless LAN lets you access your network from anywhere nearby. However, the 

numbers of walls, ceilings, or other objects that the wireless signals must pass through 

may limit the signal range. Typical ranges vary depending on types of materials and 

background RF noise in your home or business.

Connecting the Router

Step 1:

Connect the 

DSL

 port on the router to the wall outlet with a telephone cable. Next, 

connect the phone handset the 

LINE

 port of the router.

Step 2:

Connect the 

LAN

 port of the router to an Ethernet LAN port on a PC using an Ethernet 

cable (MDI/MDIX).

Step 3:

Plug the power adapter into the wall outlet and then connect the other end of it to 

the 

Power Input

 port on the router.

The following figure shows the connection of the router, PC, and telephones handsets.

 

Step 4:

If you use 3G/4G Internet service, connect the 3G USB data card to the 

USB

 interface 

on the side panel. If you use phone service through the Internet, connect a telephone 

handset to the 

PHONE

 interface on the rear panel.

Installation

Summary of Contents for DVA-5592






















































































































































Reviews: