23
Web-based Management (continued)
The items on this
window are described
below:
IP Address -
Type in
the IP Address of the
subnet or device
where packets are
routed.
Subnet Mask -
Type
in an appropriate
subnet mask that
allows the static route
to function.
Gateway -
Type in the IP Address of the gateway used for traffic destined
for the specified subnet or device.
Interface -
Select WAN or LAN Interface.
Metric -
Type in the maximum number of hops allowed for the static route.
State -
Enable of disable the route.
Click on the
Save
button at the bottom right of the window to save the settings.
Click on the
Clear
button at the bottom right of the window to clear the
settings.
Static Route Configuration-2nd window
Bridge Mode
To enable Bridge
Mode, select ON; to
disable Bridge Mode,
select OFF.
Click on the
Save
button at the bottom
right of the window to
save the settings.
