Frequently Asked Questions (continued)
36
Why can´t I access the web based configuration? (continued)
S t e p 4
(continued)
Check your IP Address. Your computer must have an IP
Address in the same range of the device you are attempting to configure. Your D-Link
device uses 10.1.1.1.
Make sure you take note of your computer´s Default Gateway IP Address. The
Default Gateway is the IP Address of the D-Link VoIP Terminal Adapter. By
default, it should be 10.1.1.1.
How can I assign a Static IP Address in Windows XP?
Step 1
Click on Start > Control Panel > Network and Internet Connections > Network
connections.
Step 2
See
Step 2
for Windows 2000 and continue from there.
How can I assign a Static
IP Address in Windows
2000?
Step 1
Right-click on My Network
Places and select Properties.
Step 2
Right-click on the Local Area
Connection which represents your
network card and select Properties.
Highlight Internet Protocol (TCP/ IP)
and click Properties.
