DVG-2102S User’s Manual
Telephone Interface Description
D-Link Systems, Inc.
6
Rear Panel
1.
Power Receptor:
Receptor for the provided power adapter.
2.
WAN:
Connect to your broadband modem using an Ethernet cable or c
onnect to your Ethernet
enabled computers using Ethernet cabling.
3.
Phone Port (1-2):
Connect to your phones using standard phone cabling (RJ-11).
WARNING:
DO NOT
connect the phone ports to each other (FXS to FXS). Doing so may damage
your VoIP Telephone Adapter.
Use
Reset Button
to restore factory default settings:
1. Power
on.
2.
Press and hold the reset button for 5 seconds.
3.
Release the reset button. Factory settings will be restored.