D-Link DVG-3004S User Manual
82
-sigtype the package of call signal
Note:
The value of rtptype and sigtype is from 0 to 63.
It’s working if it supported by your network.
4.2.22 [pt]
RTP payload type configuration and information
-------------------------------------------------------------------------------------------------
usr/config$ pt
RTP payload type configuration and information
Usage:
pt -print Display the RTP payload type information
-rfc2833 Configurate the DTMF RFC2833 payload type
-dtmf Configurate the DTMF payload type
-fax Configurate the FAX payload type
-faxbypass Configurate the FAX ByPass payload type
-modembypass Configurate the MODEM ByPass payload type
-redundancy Configurate the Redundancy payload type
-modemrelay Configurate the MODEM Relay payload type
Example:
pt -rfc2833 96 -fax 101
usr/config$
4.2.23 [rom]
ROM file information and firmware upgrade function.
------------------------------------------------------------------------------------------------
usr/config$ rom
ROM files updating commands
Usage:
rom [-print][-app][-boot][-dsptest][-dspcore][-dspapp][-greet][-askpin]
-s TFTP/FTP server ip -f filename
rom -print
