D-Link DVG-5004S Quick Installation Manual Download

Page: 3 / 7

Rear Panel

Phone Ports

Connect to your phones using standard phone cabling.

LAN Port

Connect to your Ethernet enabled computers using
Ethernet cabling.

WAN Port

Connects to your broadband modem using an Ethernet
cable.

Reset

This is used to reset the unit to the factory default
settings.

DC 12V

The power adapter attaches here.

Using a power supply with a different voltage rating

will

damage this product.

Summary of Contents for DVG-5004S

Page 3: ... Ethernet enabled computers using Ethernet cabling WAN Port Connects to your broadband modem using an Ethernet cable Reset This is used to reset the unit to the factory default settings DC 12V The power adapter attaches here Using a power supply with a different voltage rating will damage this product ...

Page 6: ... configuration of your hardware If you are unsure of your connection type or do not know your username and password please check with your Internet Service Provider Open your Web browser and type http 192 168 8 254 into the URL address box Press the Enter or Return Key Click OK to enter Web Site Click Network Settings Click PPPoE Enter PPPoE Account Password and Confirm Password ...

Page 7: ...enu Select Save Settings and Restart Click Accept Once the unit reboots you will see the message Check to see if the status LED light goes from blinking green to solid green on the front panel of the DVG 5004S The information found on the Device Information page is necessary for VoIP service registration ...