D-Link DVG-5008SG, Quick Installation Manual

DVG-5008SG FXS VoIP Gateway 

2 

Power 

Power LED. A steady light indicates a proper connection 
to a power source.

VoIP

The VoIP LED will turn on when the VoIP Gateway is 
connected to a VoIP service provider. The LED will blink if 
not connected to a service provider. 

Alarm 

A blinking light indicates the VoIP Gateway is attempting 
to connect with the Provisioning server or DVG can’t get 
IP from DHCP or PPPoE Server. Once the service 
connects, the LED will turn off. The LED will light solid red 
if the self-test or boot-up fails. 

WAN

When a connection is established the LED will light up 
solid. The LED will blink to indicate activity. If the LED 
does not light up when a cable is connected, verify the 
cable connections and make sure your devices are 
powered on. 

LAN

When a connection is established the LAN LED will light 
up solid on the appropriate port. The LEDs will blink to 
indicate activity. If the LED does not light up when a cable 
is connected, verify the cable connections and make sure 
your devices are powered on. 

Phone

Green Blinking – FXS is alerting (ringing) for an inbound 
call. 
Green Solid – The line is in use. 
Red Solid – As users execute “Status-> FXS Line 
Diagnostic” and there is some error on the FXS port. 

Hardware Overview