DVG-7022S/7044S/7062 User’s Manual
Digit Map
Digit Map Rule
y
Enable:
Enable detection of this entry.
y
Scan Code:
Defines the digits for the gateway to scan while user is dialing.
y
VoIP Dial-out
: Defines the dialed number rule for the gateway to call through Internet.
y
PSTN Dial-out:
Defines the dialed number rule for the gateway to call through PSTN.
y
User Dial Length:
Defines total number of digits that user dialed. A setting of zero tells the gateway
scans digits only and disregards the total digit count.
y
Route:
Determine the interface calls should go through if above conditions satisfied.
Methods of Digit Map:
Method 1- Single mapping:
Fill a short code into the Scan Code column, and enter the desired phone
number into the VoIP Dial-out or PSTN Dial-out column.
For example
,
Scan Code: 55
VoIP Dial-out: 07021234567
User Dial Length: 2
Route: VoIP
Pick up the handset and dial 55 and the system will dial 07021234567. You also can use Digit Map Testing
to know that the system will dial 07021234567 and go through Internet.
D-Link Systems, Inc.
38