DVG-7022S/7044S/7062 User’s Manual
Gateway Configuration-IVR
4-2 IP Configuration Settings—Set the IP Configuration of the WAN Port
Static IP Settings
NOTE: Complete static IP settings should include a static IP (option 1 under 114), IP address (111),
Subnet Mask (112), and Default Gateway (113). Please contact your Internet Service Provider (ISP) if
you have any questions.
Function Command
Select a Static IP
y
After entering IVR mode, dial 114.
y
After hearing “Enter value”, dial 1 (to select static IP)
IP address Settings
y
After entering IVR mode, dial 111. After hearing “Enter value”, enter your IP
address followed by “#”.
Example
: If the IP address is 192.168.1.200, dial 192*168*1*200#.
Subnet Mask Settings
y
After entering IVR mode, dial 112. After hearing “Enter value”, enter your
subnet mask followed by “#”.
Example
: If the subnet mask value is 255.255.255.0, dial 255*255*255*0#.
Default Gateway Settings
y
After entering IVR mode, dial 113. After hearing “Enter value”, enter your
default gateway’s IP address followed by “#”.
Example
: If the default gateway is 192.168.1.254, dial 192*168*1*254#.
Save Settings and Restart
y
To save settings, dial
509
(Save Settings). The system will save the current
settings. Please restart the system. Wait for about 40 seconds for the
system to restart, and then enter
101
to check whether or not the IP
address was retained. If the IP address is not repeated, this indicates that
the gateway is not properly connected. Please check to be certain that the
cable connection, account, and password are all correct.
Dynamic IP (DHCP) Settings
After entering IVR mode, dial 114.
After hearing “Enter value”, dial 2 (to select DHCP).
Saving settings –press 509 (Save Settings). Please restart the system. After the system is restarted, press 101 to
check whether or not the IP address was retained.
NOTE: If the system does not repeat the IP address, this indicates that the gateway failed to
communicate with a DHCP server. Please check your DHCP server or ISP.
ADSL PPPoE Settings
NOTE: Complete PPPoE settings should include: Select PPPoE (option 3 of 114), PPPoE account
(121) and PPPoE password (122).
Please contact your local Internet Service Provider (ISP) if you have any questions.
D-Link Systems, Inc.
75