31
Trunk Hunting Order: To set FXO dial-out mode when there is an incoming call dialed FXO
representative number.
First Idle: The gateway will assign each unassigned call from first FXO line.
Sequential: The gateway will automatically assign the first unassigned call to the first FXO
line. The second FXO line will dial the second unassigned call out. Each line will be used.
Enable FXO/Trunk Extension Number: Select this function only when FXO receives 2 or
more different PBX or PSTN, or under special circumstances. Users are free to call out from
a desired channel, if assigned. If you register to a Proxy it MUST be checked.
Description:
If the user at P1 (FXS) of this system wants to assigns L4 (FXO) to make a call, he/she can dial 704
22520199.
If this item isn’t checked, the gateway will select a line automatically to call out from. For example, dial
22520199 without adding the extension number of the FXO port.
Pick up Line by Dialing Extension Number: Allows user to dial just the FXO extension – 703
- to use when the PSTN line is connected on the FXO port. If you are registered to a Proxy,
it MUST be checked.
Wait for Caller ID before FXO / Trunk pick up: To detect caller ID from FXO port.
Transit in Busy Tone Limit: The duration gateway plays a busy tone before FXO hook-on.
To notify the caller from PSTN that this call is finished.
Ring Time Limit(10 - 600secs)
:
The timeout to cancel a call when no one answers.
Enable End of Digit Tone
:
The gateway will play a “Beep-Beep” tone to notify the call is in
progress.
VoIP Calling Notification: The gateway will play a tone to notify the call is through VoIP.
Summary of Contents for DVG-7062S
