D-Link DW-655H, User Manual

- 3 - 

Installation 

Installation for Windows 95, Windows 98 and Windows 2000 

Before installing the driver, you will need a copy of the operating system installation media, 
usually a CD supplied with your computer or operating system. 
 
On Windows 98 systems, the installation files are sometimes archived on the hard disk in 
C:\WINDOWS\OPTIONS\CABS. On Windows 2000 systems, the system may prompt you 
to load operating system files from the Windows 2000 installation disk. Installation under 
Windows 95 is identical to the procedure given above for Windows 98 and Windows 2000. 
Only Windows 95 OSR2 or higher is supported. 
   
The Setup program also installs Configuration Utility in the DW-655H Wireless LAN PC 
Card in the Program directory. This configuration utility can help you to understand and 
maintain your Wireless LAN. 
 

Install Driver 

Step 1:

 Turn on your computer. 

Step 2:

 Insert the DW-655H Wireless LAN PC Card into the PC Card slot. Align the card 

properly before putting it in the slot. Insert the card firmly without forcing until it seats 
snugly. 

CAUTION:

Forcing a misaligned card into the slot can damage the computer or the card. 

Step 3:

 Windows finds a new hardware shown 

DW-655H or DW650

 and asks for the driver 

of DW-655H Wireless PC Card. The driver installation wizard guides you through the steps 
standard for your operating system. 
 

Step 4:

 You will be asked to supply CDs or directory path information for the driver. This 

driver shall be located in the following directory. 
D:\DW650\    (if D:\ is your CD-ROM drive)

Step 5:

 Windows finds the driver described as 

DW-655H Wireless LAN PC Card

. Follow 

the directions of Windows dialog boxes to complete the driver installation. After completing 
the installation, Windows dialog will display 

Systems Setting Change

 and ask to restart the 

notebook. Click “Yes” to reboot the computer.