6
D-Link DWA-X3000 User Manual
Section 2 - Installation
Getting Started
Installation
This section will walk you through the installation process. If you have a built-in wireless adapter, disable it in the Device Manager
before installing your D-Link adapter. If you have previously installed another wireless adapter, uninstall it before proceeding.
Verify the following before installing your new D-Link wireless adapter:
• Disable any built-in wireless and/or Ethernet Adapters
• Verify the settings such as the wireless network name (SSID) and security settings of the network(s) you want to connect
to
Remove Existing Installations
If you’ve previously installed another wireless adapter, make sure that the software is uninstalled before installing the new
software. Some utilities may cause a conflict with the new software. If you plan to use multiple adapters at different times,
make sure that the utilities are not set to load when your computer boots up. To remove any old software, click
Start
>
Control
Panel
>
Uninstall Programs
.