Unified Access Point Administrator’s Guide
Unified Access Point Administrator’s Guide
Page 115
January 2015
Appendix B - Configuration Examples
Appendix B - Configuration Examples
This appendix contains examples of how to configure selected features available on the UAP. Each example contains
procedures on how to configure the feature by using the Web interface, CLI, and SNMP.
This appendix describes how to perform the following procedures:
•) “Configuring a VAP” on page 115
•) “Configuring Radio Settings” on page 117
•) “Configuring the Wireless Distribution System” on page 118
•)
“Clustering Access Points” on page 119
•) “Configuring Client QoS” on page 121
For all SNMP examples, the objects you use to AP are in a private MIB. Take DWL-6600AP for example, the path
to the tables that contain the objects is iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).dlink(171).dlink-
products(10).dwl-6600AP(128).dwl6600AP(1).dwl_6600AP(1).dwlWLANAPNewMibs(26).
DWL-8610AP: 1.3.6.1.4.1.171.10.38.29.1.26
DWL-6610AP: 1.3.6.1.4.1.171.10.143.1.1.26
DWL-8600AP: 1.3.6.1.4.1.171.10.37.29.1.26
DWL-6700AP: 1.3.6.1.4.1.171.10.142.1.1.26
DWL-6600AP: 1.3.6.1.4.1.171.10.128.1.1.26
DWL-3600AP: 1.3.6.1.4.1.171.10.129.1.1.26
DWL-2600AP: 1.3.6.1.4.1.171.10.130.1.1.26
Configuring a VAP
This example shows how to configure VAP 1 with the following non-default settings:
•)
VLAN ID: 2
•) SSID: Marketing
•) Security: WPA Personal using WPA2 with CCMP (AES)
VAP Configuration from the Web Interface
1.) Log onto the AP and navigate to the
Manage > VAP
page.
Figure 69 -
VAP Configuration from the Web Interface
2.) In the
Enabled
column for VAP 1, select the check box.
3.)
Enter
2
in the
VLAN ID
column.
4.) In the
SSID
column, delete the existing SSID and type
Marketing
.
5.) Select
WPA Personal
from the menu in the Security column. Additional fields appear.
6.) Select the
WPA2
and
CCMP (AES)
options, and clear the WPA and TKIP options.
7.)
Enter a WPA encryption key in the
Key
field. The key can be a mix of alphanumeric and special characters. The
key is case sensitive and can be between 8 and 63 characters.
•)
Click
Apply
to update the AP with the new settings.
