Unified Access Point Administrator’s Guide
Unified Access Point Administrator’s Guide
Page 124
January 2015
Appendix B - Configuration Examples
Figure 81 -
Configure Client QoS DiffServ Policy Map Settings (Rule)
10.)
For the
class_voip
Class Map
, select the
Mark IP Dscp
option, and then select
ef
from the
Select From List
menu.
11.)
Traffic that meets the criteria defined in the
class_voip
class is marked with a DSCP value of EF (expedited
forwarding).
12.) Click
Apply
to save the policy.
13.) Navigate to the
Client QoS > VAP QoS Parameters
page.
Figure 82 -
Configure Client QoS VAP Settings
14.) Select
VAP 2
from the
VAP
menu.
15.)
Make sure that the
Client QoS Global Admin Mode
and the
QoS Mode
are both enabled.
16.)
From the
DiffServ Policy Up
menu, select
pol_voip
.
17.) Click
Apply
to update the AP with the QoS settings.
Configuring QoS by Using the CLI
ACL Configuration
1.) Connect to the AP.
2.) Create an ACL named acl1.
add acl acl1 acl-type ipv4
3.)
Add a rule to acl1 that allows HTTP traffic from the 192.168.1.0 subnet.
add rule acl-name acl2 acl-type ipv4 action permit protocol ip src-ip 192.168.1.0 src-ip-
mask 0.0.0.255 src-port http
