Unified Access Point Administrator’s Guide
Unified Access Point Administrator’s Guide
Page 45
January 2015
Section 4 - Managing the Access Point
Figure 19 -
Scheduler Configuration
Field
Description
Global Scheduler
Mode
A global switch to enable or disable the scheduler feature. The default is
Disable
.
Scheduler Operational Status
Status
The operational status of the Scheduler. The range is
Up
or
Down
. The default is
Down
.
Reason
Provides additional information about the status. The reason can be one or more of the
following:
•) IsActive
– Operational status is up.
•) ConfigDown
– Operational status is down because global configuration is disabled.
•) TimeNotSet
– Operational status is down because the AP time has not been set,
either manually or by specifying an NTP server to use.
•)
ManagedMode
– Operational status is down because the AP is in managed mode.
Scheduler Profile
The Scheduler profile defines the list of profiles names that can be associated to the VAP or
Radio configuration. Rules are associated with a named scheduler profile. You can define up
to 16 scheduler profile names. By default, no profiles are created.
The profile name can be up to 32 alphanumeric characters. Click
Add
to add the profile
name.
Rule Configuration
Each scheduler profile may have up to 16 periodic rules. The list of parameters for each
periodic rule are described below.
Select Profile
Select the profile name from the menu.
Set Schedule
The day of the week. Range is:
Daily
,
Weekday
(Monday to Friday),
Weekend
(Saturday
and Sunday),
Monday
,
Tuesday
,
Wednesday
,
Thursday
,
Friday
,
Saturday
,
Sunday
. The
default is
Daily
.
Start Time
The time when the radio or VAP will be operationally enabled. The time is in HH:MM 24-hour
format. The range is <00-24>:<00-59>. The default is 00:00.
End Time
The time when the radio or VAP will be operationally disabled. The time is in HH:MM 24-
hour format. The range is <00-24>:<00-59>. The default is 00:00.
Table 20 -
Scheduler Configuration
To change an existing rule, select the rule, update the values in the
Rule Configuration
area, and click
Modify Rule
.
