802.11 a/g Dual Band Access Point Command Line Interface Manual
16
snmp delview
Delete User View
snmp delview <ViewName> <OID >
Explanation:
ViewName: <string>
OID: <string> or all for all OID
snmp showview
Show User View
snmp showview
snmp editpubliccomm
Edit public communication String
snmp editpubliccomm <publicCommunityString>
snmp editprivatecoom
Edit private communication String
snmp editprivatecomm <publicCommunityString>
snmp addcomm
Add Communication String
snmp addcomm <CommunityString> <ViewName> [Type]
Explanation:
CommunityString: <string>
ViewName:<string>
Type:1: Read-Only, 2: Read-Write
snmp delcomm
Delete Community String
snmp delcomm CommunityString<string>
snmp showcomm
Show Community String Table
snmp showcomm
snmp addhost
Add Host To Notify List
snmp addhost TrapHostIP<string> [SnmpType] [AuthType]
<AuthString>
Explanation:
TrapHostIP: <string>
SnmpType:1: v1
2: v2c
3: v3
AuthType: 0: v1_v2c
1: v3_noauth_nopriv
2: v3_auth_nopriv
3 v3_auth_priv>
AuthString: <string>, CommunityString for v1,v2c or UserNam
for:v3
snmp delhost
Delete Host From Notify List
snmp delhost <TrapHostIP >
snmp showhost
Show Host In Notify List
snmp showhost
snmp authtrap
Set Auth Trap Status
snmp authtrap [enable:disable]
snmp sendtrap
Send Warm Trap
snmp sendtrap
snmp status
Display SNMP Agent status
snmp status
snmp suspend
Suspend SNMP Agent
snmp suspend
snmp resume
Resume SNMP Agent
snmp resume
snmp load_default
Load SNMP Default Settings
snmp load_default
TFTP Commands:
tftp get
Get a file from TFTP Server.
tftp get Filename<string>
tftp uploadtxt
Upload the configuration of the device to TFTP Server.
tftp uploadtxt Filename<string>
tftp srvip
Setup the TFTP Server IP address.
tftp srvip <xxx.xxx.xxx.xxx>