D-Link DWL-6610AP Quick Install Guide
5
E
N
G
LI
S
H
Power on the Access Point
To power on the DWL-6610AP, you can use ONE of the following methods:
1. Connect the supplied power adapter, OR
2. Plug one end of your Ethernet cable into the LAN port of the DWL-6610AP, and
the other end into a port on a PoE switch.
Configure the Access Point
To set up and manage the DWL-6610AP, use one of the following methods:
1. Connect the Access Point to your computer directly via a straight-through Ethernet
cable. Manage the Access Point from the computer.
Ensure your computer is configured with a static IP address in the 10.90.90.0/24
subnet.
Launch a web browser, type the default IP address of the Access Point
(http://10.90.90.91) and then press
Enter
.
Log in to the Administration Web pages. The default login information is:
Username:
admin
Password:
admin
Computer
DWL-6610AP
3. Installation