1
D-Link DWL-7100AP User Manual
Access Point Mode
Access Point
is selected from the drop-down
menu.
Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN).
The SSID’s factory default setting is
dlink
. The SSID
can be easily changed to connect to an existing
wireless network or to establish a new wireless
network.
Enable
or
Disable
SSID broadcast. Enabling this
feature broadcasts the SSID across the network.
Auto Channel Scan
is enabled by default. All
devices on the network must share the same
channel.
The radio frequency will vary depending on the
wireless channel that is chosen.
Select
Open System
to communicate the key across the network.
Select
Shared Key
to limit communication to only those devices that share the same WEP settings.
Select
Open System/Shared Key
to allow either form of data encryption.
Select
WPA-EAP
to secure your network with the inclusion of a RADIUS server.
Select
WPA-PSK
to secure your network using a password and dynamic key changes (No RADIUS server required).
Select
WPA2-EAP
to secure your network with the inclusion of a RADIUS server and upgrade the encryption of data with
the Advanced Encryption Standard (AES).
Mode:
SSID:
SSID Broadcast:
Channel:
Authentication:
Wireless Band:
Select
IEEE802.11a
or
IEEE802.11g
.
Summary of Contents for DWL-7100AP
Page 1: ......
