D-Link DWL-7100AP User Manual
Static Pool Settings
DHCP Server Control:
Assigned IP:
Assigned MAC
Address:
SubMask:
Gateway:
Dynamic Host Configuration Protocol
assigns
IP addresses to wireless devices on the network.
This protocol simplifies network management
and allows new wireless devices to receive IP
addresses automatically without the need to
manually assign IP addresses.
Select
Enable
to allow the DWL-7100AP to
function as a DHCP server.
Use the
Static Pool Settings
to assign the same
IP address to a device at every restart. The IP
addresses assigned in the Static Pool list must
NOT be in the same IP range as the Dynamic
Pool. After you have assigned a static IP address
to a device via its MAC address, click
Apply
; the
device will appear in the
Assigned Static Pool
at
the bottom of the screen. Edit or delete the device
in this list.
Enter the MAC address of the device here.
Enter the subnet mask here.
Enter the IP address of the gateway on the
network.
Summary of Contents for DWL-7100AP
Page 1: ......
