24
D-Link DWL-8200AP User Manual
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
52
is the default channel for IEEE 802.11a, and
6
is the default
channel for IEEE 802.11g. All devices on the network must share
the same channel. The channel of an 802.11a network may not be
set manually in certain regions (e.g. Europe) in order to comply
with DFS (Dynamic Frequency Selection).
Note: The wireless adapters will automatically scan and match the
wireless setting.
This option is unavailable in WDS with AP mode.
Enter the MAC addresses of the APs in your network that
will serve as bridges to wirelessly connect multiple networks.
Select
On
or
Off
.
Click on the
Scan
button to search for available wireless networks.
Click on the network you want to connect to.
Select
Open System
to communicate the key across the
network.
Select
Shared Key
to limit communication to only those devices
that share the same WEP settings.
Select
Open System/Shared Key
to allow either form of data
encryption.
Select
WPA-Personal
to secure your network using a password
and dynamic key changes. (No RADIUS server required.)
Select
WPA2-Personal
to secure your network using a password
and dynamic key changes. No RADIUS server required and
encryption of data is upgraded with the Advanced Encryption
Standard (AES).
Select
WPA-Auto-Personal
to allow the client to either use
WPA-Personal
or
WPA2-Personal
.
SSID Broadcast:
Channel:
Auto Channel Scan:
Remote AP MAC
Address:
Radio:
WDS Site Survey:
Authentication:
Summary of Contents for DWL-8200AP - AirPremier Managed Dualband Access...
