background image

33

DWL-8220AP User’s Manual 

D-Link Systems, Inc.

Except as otherwise agreed by D-Link in writing, the replacement Software is provided only 
to the original licensee, and is subject to the terms and conditions of the license granted by 
D-Link for the Software. Software will be warranted for the remainder of the original Warranty 
Period from the date or original retail purchase. If a material non-conformance is incapable 
of correction, or if D-Link determines in its sole discretion that it is not practical to replace 
the non-conforming Software, the price paid by the original licensee for the non-conforming 
Software  will  be  refunded  by  D-Link;  provided  that  the  non-conforming  Software  (and  all 
copies thereof) is first returned to D-Link. The license granted respecting any Software for 
which a refund is given automatically terminates.

Non-Applicability of Warranty:

The Limited Warranty provided hereunder for hardware and software of D-Link’s products 
will not be applied to and does not cover any refurbished product and any product purchased 
through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, 
or the liquidators expressly disclaim their warranty obligation pertaining to the product and 
in that case, the product is being sold “As-Is” without any warranty whatsoever including, 
without limitation, the Limited Warranty as described herein, notwithstanding anything stated 
herein to the contrary.

Submitting A Claim:

The  customer  shall  return  the  product  to  the  original  purchase  point  based  on  its  return 
policy. In case the return policy period has expired and the product is within warranty, the 
customer shall submit a claim to D-Link as outlined below:

• The customer must submit with the product as part of the claim a written description 

of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link 
to confirm the same.

•  The  original  product  owner  must  obtain  a  Return  Material  Authorization  (“RMA”) 

number from the Authorized D-Link Service Office and, if requested, provide written 
proof of purchase of the product (such as a copy of the dated purchase invoice for the 
product) before the warranty service is provided.

• After an RMA number is issued, the defective product must be packaged securely in 

the original or other suitable shipping package to ensure that it will not be damaged 
in transit, and the RMA number must be prominently marked on the outside of the 
package.  Do  not  include  any  manuals  or  accessories  in  the  shipping  package.  D-
Link will only replace the defective portion of the Product and will not ship back any 
accessories.

•  The  customer  is  responsible  for  all  in-bound  shipping  charges  to  D-Link.  No  Cash  on 
Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become 
the property of D-Link. Products shall be fully insured by the customer. D-Link will not be 
held responsible for any packages that are lost in transit to D-Link. The repaired or replaced 
packages will be shipped to the customer via UPS Ground or any common carrier selected 
by D-Link, with shipping charges prepaid. Expedited shipping is available if shipping charges 
are prepaid by the customer and upon request.

Warranty (continued)

Warranty

Summary of Contents for DWL-8220AP - AirPremier Wireless Switch Dualband Access...






































Reviews: