manualshive.com logo in svg

D-Link DWL-8500AP, Command Reference Manual

The D-Link DWL-8500AP is a high-performance wireless access point designed for seamless connectivity. With its advanced specifications, this product provides incredibly fast and reliable internet speeds. For user convenience, a comprehensive manual is available for free download from our website, allowing users to easily set up and maximize the potential of this exceptional device.

Share
Download
background image

18    © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.

CLI Command Reference

show tech-support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   268

Logging Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   268

logging buffered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   268
logging buffered wrap  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   269
logging cli-command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   269
logging console  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   269
logging host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   270
logging host remove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   270
logging port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   270
logging syslog  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   270
show logging  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   271
show logging buffered  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   271
show logging hosts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   271
show logging traplogs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   272

System Utility and Clear Commands  . . . . . . . . . . . . . . . . . . . . . . . . . . . .   272

traceroute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   272
clear config  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   272
clear counters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   273
clear igmpsnooping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   273
clear pass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   273
clear port-channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   273
clear traplog. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   273
clear vlan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   273
enable passwd  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   273
logout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   274
ping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   274
quit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   274
reload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   274
copy  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   275

Keying for Advanced Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   276

license advanced  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   276
show key-features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   276

Simple Network Time Protocol (SNTP) Commands . . . . . . . . . . . . . . . . .   277

sntp broadcast client poll-interval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   277
sntp client mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   277
sntp client port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   277
sntp unicast client poll-interval . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   278
sntp unicast client poll-timeout  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   278
sntp unicast client poll-retry  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   278
sntp multicast client poll-interval  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   279
sntp server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   279
show sntp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   279
show sntp client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   280
show sntp server. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   280

DHCP Server Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   281

ip dhcp pool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   281

Summary of Contents for DWL-8500AP

























































































































































































































































































































































Reviews:

No comments

Related manuals for DWL-8500AP

GE SE-100E Instructions Manual preview
SE-100E
Brand: GE Pages: 20
Hama S2100 Operating Instruction preview
S2100
Brand: Hama Pages: 18
Cables to Go 40020 Instruction Manual preview
40020
Brand: Cables to Go Pages: 4
Eaton COOPER POWER SERIES Installation And Operation Instructions Manual preview
COOPER POWER SERIES
Brand: Eaton Pages: 16
Fema DCM Series Assembly And Operating Instructions Manual preview
DCM Series
Brand: Fema Pages: 96
OEZ PS-LT Instructions For Use preview
PS-LT
Brand: OEZ Pages: 5
Vector MZ3-V01 Quick Start Manual preview
MZ3-V01
Brand: Vector Pages: 3
FLIR ACCDPS281B Quick Start Manual preview
ACCDPS281B
Brand: FLIR Pages: 2
GBC 34.0109.41 Quick Start Manual preview
34.0109.41
Brand: GBC Pages: 2
GarrettCom DS60s Installation And User Manual preview
DS60s
Brand: GarrettCom Pages: 39
J-TECH JTECH-4K88-EX-RX Operating Instructions Manual preview
JTECH-4K88-EX-RX
Brand: J-TECH Pages: 40
Ubiquiti 0817882025218 Quick Start Manual preview
0817882025218
Brand: Ubiquiti Pages: 23
Exsys EX-1178 Manual preview
EX-1178
Brand: Exsys Pages: 2
Xantech HD88C Installation Instructions Manual preview
HD88C
Brand: Xantech Pages: 12
Omega Engineering LVU-230 User Manual preview
LVU-230
Brand: Omega Engineering Pages: 16
Intellinet 560641 Instructions Manual preview
560641
Brand: Intellinet Pages: 12
LEGRAND Valena Life LE-752107 User Manual preview
Valena Life LE-752107
Brand: LEGRAND Pages: 5
Thorn SENSALINK SENLSS V2 Installation And Commissioning Instructions preview
SENSALINK SENLSS V2
Brand: Thorn Pages: 2

Brands by name

Popular brands

Load more brands