SNMP Commands 311
7 Management Commands
Format
no snmp-server community ipaddr
<name>
Mode
Global Config
snmp-server community ipmask
This command sets a client IP mask for an SNMP community. The address is the associated
community SNMP packet sending address and is used along with the client IP address value to
denote a range of IP addresses from which SNMP clients may use that community to access
the device. A value of 255.255.255.255 will allow access from only one station, and will use
that machine's IP address for the client IP address. A value of 0.0.0.0 will allow access from
any IP address. The name is the applicable community name.
Default
0.0.0.0
Format
snmp-server community ipmask
<ipmask> <name>
Mode
Global Config
no snmp-server community ipmask
This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the
applicable community name. The community name may be up to 16 alphanumeric characters.
Format
no snmp-server community ipmask
<name>
Mode
Global Config
snmp-server community mode
This command activates an SNMP community. If a community is enabled, an SNMP manager
associated with this community manages the switch according to its access right. If the
community is disabled, no SNMP requests using this community are accepted. In this case the
SNMP manager associated with this community cannot manage the switch until the Status is
changed back to Enable.
Default
private and public communities - enabled
other four - disabled
Format
snmp-server community mode
<name>
Mode
Global Config
no snmp-server community mode
This command deactivates an SNMP community. If the community is disabled, no SNMP
requests using this community are accepted. In this case the SNMP manager associated with
this community cannot manage the switch until the Status is changed back to Enable.
Format
no snmp-server community mode
<name>
Mode
Global Config
snmp-server community ro
This command restricts access to switch information. The access mode is read-only (also
called public).
Summary of Contents for DWL-8500AP
