312 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Format
snmp-server community ro
<name>
Mode
Global Config
snmp-server community rw
This command restricts access to switch information. The access mode is read/write (also
called private).
Format
snmp-server community rw
<name>
Mode
Global Config
snmp-server enable traps violation
This command enables the sending of new violation traps designating when a packet with a
disallowed MAC address is received on a locked port.
NOTE:
For other port security commands, see
“Protected Ports Commands”
on
page 65.
Default
disabled
Format
snmp-server enable traps violation
Mode
Interface Config
no snmp-server enable traps violation
This command disables the sending of new violation traps.
Format
no snmp-server enable traps violation
Mode
Interface Config
snmp-server enable traps
This command enables the Authentication Flag.
Default
enabled
Format
snmp-server enable traps
Mode
Global Config
no snmp-server enable traps
This command disables the Authentication Flag.
Format
no snmp-server enable traps
Mode
Global Config
snmp-server enable traps bcaststorm
This command enables the broadcast storm trap. When enabled, broadcast storm traps are sent
only if the broadcast storm recovery mode setting associated with the port is enabled.
Summary of Contents for DWL-8500AP
